Dry Lamination Adhesive
-
- Category :
Pharmaceuticals and Biochemicals
- CAS NO :
- EC NO :
- Molecular Formula :
- Main Specifications :
- Synonyms :
Package: Pack in steel drum normally
Product description:
AT6170A/B is an Alcohol-based two-component polyurethane adhesive with high initial bonding strength, widely used in laminating of various treated film like BOPP, PET, PA, CPE, CPP, AL, etc.
1. Typical Features:
Excellent initial bonding strength, better than AT6070A/B.
Especially be available to operate by small or middle dry laminating machine.
Good transparency and high peeling strength
2. Recommended Operating Conditions
Application Method Direct gravure
Application Cylinder 100-200 line
Application solids 20-35% (Recommend 30%)
Pot Life Static 8 hours approximately
Dynamic 24 hours approximately
Dry Coating Weight 1.5-3.0 GSM depending on structure
Drying Section Temperature 55-65° C 65-75° C 75-85° C(three sections)
Laminating Temperature 50-80° C
Cure Time 12 hours (40-50° C)
Cleaning Solvent Ethanol.
3. Package
Pack in steel drum normally.
Main agent is 18kg/drum. Hardener is 3kg/drum.
4. Safety & Storage
Store in cool, dry, well-ventilated area away from heat and ignition sources, keep container tightly closed.
Refer to MSDS for more safety information
5. Important notice
These documents we provided are made on the basis of our recent knowledge and experience. All these terms we mentioned are only suitable in normal condition and could be used as references. Please test and affirm before formal production or contact with our technician to some special structures of films and stuffs packed, we do not take on any legal duty for these documents.
Search Product